Garmin International Inc 00991 Manuel D’Utilisation

PRELIMINARY

PRELIMINARY

GMR 404/406 O

PERATION

 > 

T

HE

 R

ADAR

 A

DJUSTMENT

 M

ENU

1.  Use th

e Rocker to highlight Show Guard Zone 1 or 2, and 

press 

ENTER.

2.  Use the 

Rocker to highlight Adjust and press ENTER.

3.  Using the 

Rocker, defi ne the area on the Radar Page.

4.   Press 

ENTER to accept the change.

With a Guard Zone selected on the Radar Page, soft key options may 

be available.

The VRM ( Variable Range Marker) and  EBL ( Electronic Bearing 

Line) tools measure range and bearing to a target. The center point 

of the VRM can be moved, allowing measurement from one target to 

another. Two V/E tools can be active at the same time. 
The VRM/EBL Menu has two areas, “VRM/EBL 1” and “VRM/EBL 

2.” Each area has two settings, Show/Hide and Adjust. 

  Use the 

Rocker to highlight Show VRM/EBL 1 or 2 and press 

ENTER.

The diameter of the VRM and the angle of the EBL are adjustable.

1.  Use the 

Rocker to highlight Adjust and press ENTER.

2.   Press the 

Rocker right or left to rotate the Electronic Bearing 

Line around the center point of the VRM. 

3.   Press the 

Rocker up or down to increase or decrease the size 

of the Variable Range Marker.

4.  Press 

ENTER to accept the changes.

GMR 404_406 Owners Manual Preliminary Review.indd   10

3/27/2006   4:08:18 PM