Garmin International Inc 01017 Manuel D’Utilisation

A

PPENDIX

1.  Use the security screwdriver to loosen the screw on the top 

of the cradle lock. 

2.  Lift the cradle lock up until it clicks. 
3.  Pull the BMW Motorrad Navigator III unit out of the mount. 
4.  Slide the power connector to the left to disconnect the 

power cable. 

  NOTE: Do not connect the USB cable to your computer until 

you have loaded the USB drivers using the enclosed DVD-

ROM. 

To update your software, load additional maps, or load Custom 

POIs, connect your Navigator III to your computer using the USB 

cable provided. 

Before connecting the USB cable to your computer, place the 

enclosed DVD-ROM into your computer’s DVD-ROM drive. 
If the DVD-ROM does not start automatically, click 

 and 

then 

. Type the letter of your DVD-ROM drive followed 

by “setup” (example: “D:\setup”). Then press 

. Follow the 

on-screen instructions. 

Connect the enclosed AC power cable to the power connector 

on the back of the Navigator III Connect the end to an available 

electrical outlet.