Garmin International Inc 01074 Manuel D’Utilisation
44
zūmo 500/550 Owner’s Manual
A
PPENDIX
DR
AF
T
zūmo 500/550 Owner’s Manual
45
A
PPENDIX
DR
AF
T
Troubleshooting
Problem/Question
Solution/Answer
My zūmo never gets
satellite signals.
Take your zūmo outside, away from tall buildings and
trees.
My phone will not
connect to the zūmo.
Verify that the Bluetooth field is set to
Enabled
.
Make sure your phone is turned on and is less than 10
meters (about 33 feet) away from your zūmo.
See
See
How do I know my
zūmo is in USB Mass
Storage Mode?
When your zūmo is in USB Mass Storage Mode, a
picture of a zūmo connected to a computer is shown.
Also, you should see two new removable disk drives
listed in
My Computer
.
My computer never
senses that the zūmo
is connected.
1. Unplug the USB cable from your computer.
2. Turn the zūmo off.
3. Plug the USB cable into your computer and your
2. Turn the zūmo off.
3. Plug the USB cable into your computer and your
zūmo. The zūmo automatically turns on and goes into
USB Mass Storage Mode.
I cannot find any
drives named
“Garmin” in my list of
drives.
If you have several network drives mapped on your
computer, Windows may have trouble assigning drive
letters to your zūmo drives. Follow the steps on the next
page
to assign (map) your drive letters.
Problem/Question
Solution/Answer
I get a message
saying “Unsafe
Removal of Device”
when I unplug the
USB cable.
When you are ready to disconnect your zūmo from your
computer, double-click the
Unplug or Eject
icon in
your system tray. Select
USB Mass Storage Device
,
and click
Stop
. Select the zūmo drives, and click
OK
.
You can disconnect your zūmo from your computer now.
How can I rename my
zūmo drives?
1. Open
My Computer
.
2. Select the drive you want to rename.
3. Right-click your mouse, and select
3. Right-click your mouse, and select
Rename
.
4. Type the new name, and press the
Enter
key on your
computer’s keyboard.
How do I assign
(map) my zūmo
drives in Windows?
1. Turn off your zūmo.
2. Plug in the USB cable to the zūmo and your
2. Plug in the USB cable to the zūmo and your
computer. Your zūmo automatically turns on.
3. Click
Start
>
Settings
>
Control Panel
>
Administrative Tools
>
Computer Management
>
Storage
>
Disk Management
.
4. Click a zūmo removable disk drive (either the internal
memory or your SD card drive). Right-click your
mouse, and select
Change Drive Letter and Path…
.
5. Select
Edit…
, select a drive letter from the drop-down
list, and click
OK
.