Garmin International Inc 01074 Manuel D’Utilisation

G

ETTING

 S

TARTED

G

ETTING

 S

TARTED

Select a suitable location to mount the zūmo on your motorcycle based on available 

power sources and safe power cable routing.

This section illustrates two possible installation solutions: A) install the U-bolt on the 

handlebar and B) install the handlebar base to the clutch/brake clamp bracket. Custom 

mounts may require additional hardware (xref to Ram Web site?).
A) To install the U-bolt and handlebar 

1.  Place the U-bolt around the handlebar, 

and thread the ends through the 

handlebar base.

2.  Tighten the nuts to secure the base.

 

NOTE: Both 1/4” standard and M6 bolts are included. Match the size of the factory 

bolts on your clutch/brake clamp braket.

1.  Remove the two factory bolts 

on your clutch/brake clamp 

bracket. 

2.  Thread the new bolts through 

the handlebar base, spacers, 

and clamp bracket. 

3.  Tighten the bolts to secure the 

base. 

1  Thread the M4 x 40mm flathead 

bolts and nuts to attach the base 

plate to the zūmo cradle mount. 

2.  Tighten the nuts to secure the 

base plate.