Garmin International Inc 01113 Manuel D’Utilisation
Tracking System Owner’s Manual - Draft
M
aIn
p
aGeS
>
You can configure the Profile field in the center of the
page to show either elevation or ambient pressure plots
as selected from the Altimeter Page Options Menu.
page to show either elevation or ambient pressure plots
as selected from the Altimeter Page Options Menu.
Data
fields at the top of the page are user selectable
and show a variety of recorded or current data.
Altimeter Page Options
Use the Altimeter Page Options Menu to customize
the Altimeter Page. With the Altimeter Page open,
press MENU to open the Options Menu.
the Altimeter Page. With the Altimeter Page open,
press MENU to open the Options Menu.
The following options are available:
• Plot Over Time or Plot Over Distance—plots
the elevation over a period of time or plots the
elevation over a distance.
elevation over a distance.
• View Elevation Plot (View Pressure Plot)—
shows the elevation or the pressure plot.
• Zoom Ranges—allows you to the Zoom
Ranges for elevation, distance, or time when
you show the View Elevation Plot over distance
or time.
you show the View Elevation Plot over distance
or time.
• Reset—allows you to reset the elevation data
and the maximum elevation data.
• Calibrate Altimeter—If you know the correct
elevation for your location, you can increase the
accuracy of the altimeter using the “Calibrate
Altimeter” option.
accuracy of the altimeter using the “Calibrate
Altimeter” option.
• Restore Defaults—clears recorded data from
the page and begins recording new data.
You can customize the “View” option displays
using the ”Zoom Ranges” option to determine time,
distance, pressure, and elevation parameters.
using the ”Zoom Ranges” option to determine time,
distance, pressure, and elevation parameters.
Plot Over Time or Distance
These two measurement options (changes over a set
period of time or changes over a set distance) apply
only to the View Elevation Plot option. The View
Pressure Plot option is measured by time and pressure
only. When one option is active, the other is shown on
the Altimeter Page Options menu.
period of time or changes over a set distance) apply
only to the View Elevation Plot option. The View
Pressure Plot option is measured by time and pressure
only. When one option is active, the other is shown on
the Altimeter Page Options menu.
View Pressure or Elevation Plots
Select the View Elevation Plot
option to plot a profile
of elevation changes that occur as you navigate over
a set distance or period of time. Select View Pressure
a set distance or period of time. Select View Pressure
Tracking System Owner's Manual F29 29
1/16/2007 1:51:45 PM