Garmin International Inc 01393 Manuel D’Utilisation

Appendix

1.  Open Garmin MapSource Trip and Waypoint Manager. 
2.  Connect the Astro 220 to a computer using the USB 

cable provided. Turn the Astro 220 on.

3.  Turn the DC 30 on and place it within 12 inches of the 

Astro 220.

4.  Open the Dog Information page on the Astro 220 

(

).

5.  Press 

MENU > 

 > 

ENTER. 

Wait until the track data is buffered in to your 

Astro 220 and “Ready to communicate with PC” 

appears. 

6.  Go to MapSource and click the 

Tracks tab on the left 

side of the screen.

7.  Click 

Receive from Device from the Transfer pull-

down menu in MapSource.

8.  Check 

Tracks in the Receive from Device window 

and click 

9.  When “The Data was successfully received” appears, 

click 

OK in MapSource. 

10. Press 

ENTER on the Astro 220 when done.

Clean the outer casing of each unit (except for the 

Astro 220 screen) using a cloth dampened with a mild 

detergent solution and then wipe it dry. Avoid cleaners 

that may damage plastic components.

Clean the Astro 220 screen using a soft, clean, lint-free 

cloth. Use water, isopropyl alcohol, or eyeglass lens 

cleaner. Apply the liquid to the cloth, and then gently 

wipe the screen with the moistened cloth.

Hand wash the collar using a mild detergent solution, 

rinse it, and then let it air dry. Avoid chemical cleaners 

that may damage the material.