Garmin International Inc 01853 Manuel D’Utilisation
3
Determining Pedal Pod Clearance
NOTICE
The pedal pod should only contact the
crank arm at its mounting face (see
below), because this is a load-bearing
connection. If the pedal pod contacts the
crank arm anywhere else, the pedal pod
may fracture or break when the pedal is
tightened.
• If the mounting face
• If the mounting face
➊
surrounding
the threaded hole in the crank arm is
recessed more than ½ mm, use one
or more washers
➋
to fill the recess.
➋
➊
➌
• Make sure that the pedal pod
mounting face
➌
contacts the crank
arm at its mounting face. If it touches
anywhere else, use another washer to
provide the necessary clearance.
• If the mounting face of the crank arm
is protruding, do not use washers.
Draft_190-01450-90_QSM.indd 3
2/1/2012 1:36:52 PM