Garmin International Inc 01997 Manuel D’Utilisation
Changing the Fuse in the Vehicle
Power Cable
NOTICE
When replacing the fuse, do not lose any
of the small pieces and make sure they
are put back in the proper position. The
vehicle power cable does not work unless
it is assembled correctly.
If your device does not charge in your
vehicle, you may need to replace the fuse
located at the tip of the vehicle adapter.
1
Unscrew the end piece
.
TIP: You may need to use a coin to
remove the end piece.
2
Remove the end piece, the silver tip
, and the fuse
.
3
Install a 2 A fast-blow fuse.
4
Place the silver tip in the end piece.
5
Screw the end piece back into the
vehicle power cable
.
Data Field Options
Accuracy of GPS: The margin of error for
your exact location. For example, your
GPS location is accurate to within +/-
12 feet (3.65 m ).
Ambient Pressure: The uncalibrated
environmental pressure.
Ascent - Average: The average vertical
distance of ascent since the last reset.
Ascent - Maximum: The maximum rate
of ascent in feet per minute or meters
per minute since the last reset.
Ascent - Total: The total elevation
distance ascended since the last
reset.
Barometer: The calibrated current
pressure.
Battery Level: The remaining battery
power.
Bearing: The direction from your current
location to a destination. You must be
navigating for this data to appear.
Cadence: Revolutions of the crank arm or
strides per minute. Your device must
be connected to a cadence accessory.
54
Appendix
DRAFT