Garmin International Inc 02187 Manuel D’Utilisation

Select a button action.

If necessary, repeat steps 2 and 3 for the remaining buttons.

Select Menu > Setup > Displayto open the display settings.
Color Mode: Sets the device to display day or night colors.
Configure Colors: Sets the color configuration for each color mode. For day

color mode, you can select a full color or high contrast color configuration. For

night color mode, you can select a full color, red and black, or green and

black color configuration.

Backlight: Sets the backlight level.
Network Sharing: Allows you to share color mode, color configuration, and

backlight settings with other devices across the NMEA 2000 network.

Select Menu > Setup > System.
Units: Sets the units of measure.
Heading: Sets the reference used in calculating heading information.
Variance: Adjusts the variance from true north. This setting is only available

when the heading is set to True.

Beeper: Sets if and when audible sounds are used.
Auto Power: Automatically turns on the autopilot when it is connected to a

NMEA 2000 network.

GHC Low Volt. Alarm: Sounds an alarm when the autopilot is receiving low

voltage.

Language: Sets the on-screen language.
Operating Mode: Allows you to set the operating mode to normal or store demo

mode.

System Information: Allows you to view software information.

Factory Defaults: Resets the unit to factory defaults.

Device Configuration

7

DRAFT