Garmin International Inc 03393 Manuel D’Utilisation

The color and number of lit status LED

indicators change as the collar

charges. All the status LED indicators

turn solid green when the device is

fully charged.

After all the status LED indicators turn

solid green, remove the USB cord from

the device.
NOTE: The device turns on

automatically when you remove it from

the charger.

The device remains on until you turn the

device off manually (page 3)
TIP: The device does not issue corrections

for two minutes after any button press, or

after the device is removed from the

charger.

Hold the power key until all of the

status LED indicators turn green.
The device beeps, and an LED

indicates the active mode. An LED

turns blue when the smart mode is

active. An LED turns green when any

other mode is active. After two

seconds, a blue or green LED turns

red.

• On the dog collar device, hold the

power key until the status LED turns

solid red, and release the power key.
The device beeps.

You can attach the dog collar device to a

collar strap that is a maximum of 25.4 mm

wide (1 in.) and 2.78 mm thick (0.11 in.).

With the buckle facing outward, insert

the end of the collar strap 

À

 through

the slot 

Á

 on the collar device.

Pull approximately two-thirds of the

collar strap through the slot 

Â

 on the

opposite side of the device.

Quick Start Manual

3