Garmin International Inc 39288 Manuel D’Utilisation

Appendix

2.  Remove the fuse (glass and silver 

cylinder), and replace it with a 3 A 

fast-blow fuse. 

3.  Ensure that the silver tip is placed 

in the black end piece. Screw on 

the black end piece. 

To remove the nüvi from the cradle, 

hold onto the cradle and tilt the nüvi 

forward.
To remove the cradle from the 

mount, turn the cradle to the right or 

left. Apply pressure in that direction 

until the cradle snaps off the mount. 
To remove the suction cup mount 

from the windshield, flip the lever 

toward you. Pull the tab on the 

suction cup toward you.

Use the enclosed mounting disk to 

mount your unit to the dashboard and 

comply with certain state regulations. 

CaUtion: The permanent 

mounting adhesive is extremely 

difficult to remove after it is 

installed. 

1.  Clean and dry the dashboard 

where you are placing the disk.

2.  Remove the backing from the 

adhesive on the bottom of the 

disk.

3.  Place the disk on the dashboard.
4.  Remove the clear plastic cover 

from the top of the disk.

5.  Place the suction cup mount 

on top of the disk. Flip the lever 

down (toward the disk).