Garmin International Inc A2401 Manuel D’Utilisation

Select   > MENU.

Select a notification.

By default, notifications appear on the device screen when they 

are received. You can hide notifications to prevent them from 

appearing.

Select Setup > Bluetooth > Notifications > Hide.

Select MENU.
Alarm Clock: Sets an audible alarm. If you are not currently 

using the device, you can set the device to turn on at a 

specific time.

Calculator: Displays a calculator.
Calendar: Displays a calendar.
Hunt and Fish: Displays the predicted best dates and times for 

hunting and fishing at your current location.

Stopwatch: Allows you to use a timer, mark a lap, and time 

laps.

Sun and Moon: Displays sunrise and sunset times, along with 

the moon phase, based on your GPS position.

You can customize the data fields displayed on each main page.

Open the page for which you will change the data fields.

Select MENU.

Select Change Data Fields.

Select the new data field.

Follow the on-screen instructions.

Some data fields require you to be navigating or require ANT+ 

accessories to display data.
24hr Max Temperature: The maximum temperature recorded in 

the last 24 hours. Your device must be connected to a 

wireless temperature sensor for this data to appear.

24hr Min Temperature: The minimum temperature recorded in 

the last 24 hours. Your device must be connected to a 

wireless temperature sensor for this data to appear.

Accuracy Of GPS: The margin of error for your exact location. 

For example, your GPS location is accurate to within +/- 12 ft. 

(3.65 m).

Alarm Timer: The current time of the countdown timer.
Ambient Pressure: The uncalibrated environmental pressure.
Ascent - Average: The average vertical distance of ascent 

since the last reset.

Ascent - Maximum: The maximum rate of ascent in feet per 

minute or meters per minute since the last reset.

Ascent - Total: The total elevation distance ascended since the 

last reset.

Average Lap: The average lap time for the current activity.
Barometer: The calibrated current pressure.
Battery Level: The remaining battery power.
Bearing: The direction from your current location to a 

destination. You must be navigating for this data to appear.

Cadence: The number of revolutions of the crank arm or 

number of strides per minute. Your device must be 

connected to a cadence accessory for this data to appear.

Compass Heading: The direction you are moving based on the 

compass.

Course: The direction from your starting location to a 

destination. Course can be viewed as a planned or set route. 

You must be navigating for this data to appear.

Current Lap: The stopwatch time for the current lap.
Date: The current day, month, and year.
Depth: The depth of the water. Your device must be connected 

to a NMEA

®

 0183 or NMEA 2000

®

 device capable of acquiring 

the water depth.

Descent - Average: The average vertical distance of descent 

since the last reset.

Descent - Maximum: The maximum rate of descent in feet per 

minute or meters per minute since the last reset.

Descent - Total: The total elevation distance descended since 

the last reset.

Distance To Destination: The remaining distance to the final 

destination. You must be navigating for this data to appear.

Distance To Next: The remaining distance to the next waypoint 

on the route. You must be navigating for this data to appear.

Elevation: The altitude of your current location above or below 

sea level.

Elevation Above Ground: The altitude of your current location 

above ground level (if maps contain sufficient elevation 

information).

Elevation - Maximum: The highest elevation reached since the 

last reset.

Elevation - Minimum: The lowest elevation reached since the 

last reset.

ETA At Destination: The estimated time of day when you will 

reach the final destination (adjusted to the local time of the 

destination). You must be navigating for this data to appear.

ETA At Next: The estimated time of day when you will reach the 

next waypoint on the route (adjusted to the local time of the 

waypoint). You must be navigating for this data to appear.

Glide Ratio: The ratio of horizontal distance traveled to the 

change in vertical distance.

Glide Ratio To Dest: The glide ratio required to descend from 

your current position to the destination elevation. You must 

be navigating for this data to appear.

GPS Elevation: The altitude of your current location using GPS.
GPS Heading: The direction you are moving based on GPS.
GPS Signal Strength: The strength of the GPS satellite signal.
Grade: The calculation of rise (elevation) over run (distance). 

For example, if for every 10 ft. (3 m) you climb you travel 

200 ft. (60 m), the grade is 5%.

Heading: The direction you are moving.
Heart Rate: Your heart rate in beats per minute (bpm). Your 

device must be connected to a compatible heart rate monitor.

Lap Distance: The distance traveled for the current lap.
Laps: The number of laps completed for the current activity.
Last Lap Time: The stopwatch time for the last completed lap.
Location (lat/lon): The current position in latitude and longitude 

regardless of the selected position format setting.

Location (selected): The current position using the selected 

position format setting.

Location of Destination: The position of your final destination. 

You must be navigating for this data to appear.

Odometer: A running tally of distance traveled for all trips. This 

total does not clear when resetting the trip data.

8

Customizing the Device

DRAFT