MilDef Crete Inc. RK9 Manuel D’Utilisation

 

  Loosen the battery screw, remove the battery insulation sheet, and 

mount the battery.

 

 

  Connect the AC adapter with the computer and start charging the 

battery for at least 10 minutes. 

  Turn ON the computer by pressing the power switch. 

Notice:   

  When ambient temperature is under +5℃ (This is the default setting 

for this computer.), the system may not boot up immediately. System 
will beep with LED heater light flashing to remind the user while 
heater working. Also, the frequency of the LED will become faster to 
remind the user while the temperature is approaching to be suitable. 
After 5~15 minutes, the system will boot up automatically. 

  Under an emergency situation, it is able to skip heating for booting up 

the system immediately by pressing the power switch for >9 seconds. 
The speaker will also beep with a special sound. (It is not guaranteed 
all devices on the computer are possible to work properly.) 

  Press the power switch again during the heating process will shut 

down the computer. 

  Driver or application installation may be necessary for further 

operation. 

  The following procedures will help to Turn OFF the computer: 

1. Press power switch to “Shut Down”, “Standby”* or “Hibernate”* 

dependent on operating system (OS) and power management 
settings. 

2. Press power switch for 4 seconds for a “Hard” power off. But the 

system will shut down immediately without saving any data or 
parameters. 

3. Click Start 

→ Shut Down in Windows to Turn OFF.