Charles Machine Works Inc The 752TKR Manuel D’Utilisation
750/752 Tracker - OPERATION
27
BEACON TRACKING MODES
750/752 Tracker - OPERATION
27
BEACON TRACKING MODES
Operation
1.
Turn on drilling unit. Press and
hold download button to display
serial number on 750/752
Display.
hold download button to display
serial number on 750/752
Display.
2.
Turn on 750/752 Tracker and check four-digit display code.
•
Hold fore/aft/left/right button and press mode to review and
start sending code.
start sending code.
IMPORTANT: Continue to hold down fore/aft/left/right button
to adjust code.
to adjust code.
•
Use on/off button to advance
first two digits (1) and use
depth button to lower first two
digits.
first two digits (1) and use
depth button to lower first two
digits.
•
Use up arrow button to
advance last two digits (2) and
use down arrow to lower last
two digits.
advance last two digits (2) and
use down arrow to lower last
two digits.
•
Press and hold button to
advance or lower value
quickly.
advance or lower value
quickly.
Operation
1.
Turn on drilling unit. Press and
hold download button to display
serial number on 750/752
Display.
hold download button to display
serial number on 750/752
Display.
2.
Turn on 750/752 Tracker and check four-digit display code.
•
Hold fore/aft/left/right button and press mode to review and
start sending code.
start sending code.
IMPORTANT: Continue to hold down fore/aft/left/right button
to adjust code.
to adjust code.
•
Use on/off button to advance
first two digits (1) and use
depth button to lower first two
digits.
first two digits (1) and use
depth button to lower first two
digits.
•
Use up arrow button to
advance last two digits (2) and
use down arrow to lower last
two digits.
advance last two digits (2) and
use down arrow to lower last
two digits.
•
Press and hold button to
advance or lower value
quickly.
advance or lower value
quickly.