Deister Electronic GmbH AMANTAGCOMPACT Manuel D’Utilisation
4.3 DIP-switches
The amanTag compact can be configured with two eight pole dip-switches (rail A and B).
A1
activate the monitor tag function.
A2
always has to be „on“.
A3
reserved for testing-modes, has to be turned off!
A4
in case this switch is set, the RS485-address is defined by the door-number
A5-A8 Binary switch-group for definition of the door number
The numbers 0000 and 1000 must not be used!
B1-B4 binary switch-group to determine the wake-up-range
B5
B5
reserved for testing-modes, has to be turned off!
B6
special function for ending the transport mode of the transponders. Should be
turned off during normal working mode.
turned off during normal working mode.
B7
reserved for testing-modes, has to be turned off!
B8
has to be set, to activate the RS485-receiver.
V04/09/07
deister electronic GmbH 30890 Barsinghausen Germany
9
amanTag compact
ON ON
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 B4 B5 B6 B7 B8