Deister Electronic GmbH UDL500 Manuel D’Utilisation
5. Transmission protocol
The RS485 interface is being operated with 8 data bits, 1 stop bit and no parity bit. The
transmission rate can be adjusted to 9600, 19200, 38400 or 115200 baud.
The reader works with the “deBus” protocol. For details refer to document “UDL/UDK
deBus Protocol”.
transmission rate can be adjusted to 9600, 19200, 38400 or 115200 baud.
The reader works with the “deBus” protocol. For details refer to document “UDL/UDK
deBus Protocol”.
6. Mounting
The back of the reader is prepared for mounting on masts and tubes. For mounting on
masts or ceilings,deister electronic provides the link holder LRM1 as an ideal supplement
(optional, art. nr. 6103.000).
masts or ceilings,deister electronic provides the link holder LRM1 as an ideal supplement
(optional, art. nr. 6103.000).
6.1 Mast/Tube mounting
For mounting on masts/tubes the back of the reader is prepared in the way, that alignment
of the reader around its vertical or horizontal axis is possible. The jagged pipe guidings on
the back guarantee a safe tube mounting with a 360° justification round the tube and a
safe mounting of the reader as well.
of the reader around its vertical or horizontal axis is possible. The jagged pipe guidings on
the back guarantee a safe tube mounting with a 360° justification round the tube and a
safe mounting of the reader as well.
V17/01/08
deister electronic GmbH 30890 Barsinghausen Germany
11
Wiring & Installation Instructions UDL500