Lexmark International Inc N8050 Manuel D’Utilisation
Manual configuration
17
5
Manual configuration
The N8050 internal wireless print server is shipped with default settings that let you configure it in
Ad-Hoc mode by accessing the embedded Web page of the print server.
Ad-Hoc mode by accessing the embedded Web page of the print server.
Because this configuration method does not use the Wireless Setup Utility or a direct USB
connection to the computer, several of the wireless settings on both the computer and the network
will need to be accessed. As a result, extensive knowledge of wireless network and computer
settings will be needed to complete the configuration process.
connection to the computer, several of the wireless settings on both the computer and the network
will need to be accessed. As a result, extensive knowledge of wireless network and computer
settings will be needed to complete the configuration process.
Note:
To configure the wireless print server by this method, the computer that is used to
facilitate the configuration process must have a wireless network card.
facilitate the configuration process must have a wireless network card.
Before configuring the wireless print server, make sure your printer has been set up correctly
•
The internal wireless print server option card has been installed correctly in the printer.
•
The toner or print cartridges are installed correctly.
•
Paper has been loaded into the printer.
•
The printer is turned on and ready to be installed.
For help setting up your printer, see your printer documentation.
Configuring the print server in Ad-Hoc mode
1
Make sure the printer power light is on.
2
Access and record the computer’s current wireless network parameters.
For information on accessing the current wireless network parameters, see the wireless
network documentation, or contact your network support person.
network documentation, or contact your network support person.