Fuji Xerox Co. Ltd. LUFX Manuel D’Utilisation
1.4 Installation Procedure
11
In
st
allin
g t
h
h
e P
rint
e
e
r
1
2
Take the EP cartridge out of the box
and shake it 7 to 8 times as shown in
the diagram.
and shake it 7 to 8 times as shown in
the diagram.
3
Place the EP cartridge on a flat
surface and pull the seal out
horizontally.
surface and pull the seal out
horizontally.
z
When pulling out the seal, pull it out
horizontally. The tape might break if it is pulled
out diagonally.
horizontally. The tape might break if it is pulled
out diagonally.
z
After the seal has been pulled out, do not shake
or bump the EP cartridge.
or bump the EP cartridge.
4
Hold the EP cartridge by the grip and
insert it into the slot inside the printer.
insert it into the slot inside the printer.
z
Do not touch any parts inside the printer.
z
Ensure that the EP cartridge is firmly set.
5
Close the top cover securely.
Lupin_IOT.book Page 11 Monday, February 24, 2003 10:23 AM