Xircom EAG2919 Manuel D’Utilisation
Eagle II GSM Radio Module Technical Manual Preliminary Draft: 08/31/00
2
Part Number: 07100017 version 00.04
© 2000 Xircom, Inc. All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc.
All trademarks and copyrights are the property of Xircom, Inc.
SAFETY PRECAUTIONS
Important Safety Information
The following information applies to the devices described in this manual. Always
observe all standard and accepted safety precautions and guidelines when handling any
electrical device.
observe all standard and accepted safety precautions and guidelines when handling any
electrical device.
!
Save this manual: it contains important safety information and operating instructions.
!
Do not expose the Eagle™ II product to open flames.
!
Ensure that liquids do not spill into the devices.
!
Do not attempt to disassemble the product: Doing so will void the warranty. With the
exception of the Subscriber Identification Module (SIM), this product does not contain
consumer-serviceable components.
exception of the Subscriber Identification Module (SIM), this product does not contain
consumer-serviceable components.
Guidelines for Limiting RF Exposure
The Eagle II products are GSM radio transceivers, which operate under the authority of
47 CFR Part 24, Subpart E of the FCC Rules and Regulations. When installed and
operated in accordance with the instructions provided in this manual, these devices
comply with current FCC regulations regarding human exposure to radio frequency
radiation.
47 CFR Part 24, Subpart E of the FCC Rules and Regulations. When installed and
operated in accordance with the instructions provided in this manual, these devices
comply with current FCC regulations regarding human exposure to radio frequency
radiation.
The following installation and operation restrictions apply to all Eagle II products:
!
This device may only be used in fixed and mobile applications.
!
Portable applications, as defined by the FCC, are prohibited.
!
The use of this device for desktop and other applications where the antenna can
easily be relocated are considered by the FCC to be mobile applications.
easily be relocated are considered by the FCC to be mobile applications.
!
A separation distance of at least 20 cm (7.87 inches) between the antenna and the
body of the user and other persons must be maintained at all times
body of the user and other persons must be maintained at all times
!
In FIXED applications, antenna gain is limited to a maximum of 7 dBi, with a
corresponding Equivalent Isotropic Radiated Power (EIRP) of 37 dBm / 5 W.
corresponding Equivalent Isotropic Radiated Power (EIRP) of 37 dBm / 5 W.
!
In MOBILE applications, antenna gain is limited to a maximum of 3 dBi, with a
corresponding EIRP of 33 dBm / 2 W.
corresponding EIRP of 33 dBm / 2 W.
!
End products must provide instructions to ensure compliance with radio frequency
radiation exposure requirements.
radiation exposure requirements.
!
A warning label visible to all persons exposed to the antenna and identical to that
described in this manual must be displayed on or next to the antenna.
described in this manual must be displayed on or next to the antenna.
!
Separate FCC approval for RF exposure compliance is required for end products that
do not meet these conditions.
do not meet these conditions.
Antenna gain is defined as gain in dBi (dB referenced to an isotropic radiator) minus
cabling loss.
cabling loss.