Indyme Solutions Inc DM Manuel D’Utilisation
Indyme Solutions, Inc. 8295 Aero Place San Diego, CA 92123 USA
+1.858.268.0717 +1.800.829.6141
Page 1 of 10
Install Document
02-19-2016
DM90XX(9021,22,23) Dwell and DM9025 Touch Sensor Installation Guide
Please read these instructions prior to installing the Indyme system.
Introduction
The purpose of this document is to provide
instructions for installation of the DM90XX
(9021,9022,9023) Dwell and DM9025 Touch
Sensors. DM9025 Touch Sensors will be installed
throughout the sales floor. The devices will
monitor and report activity with various products
throughout the store. Multi-purpose mounting
hardware is included with each sensor.
instructions for installation of the DM90XX
(9021,9022,9023) Dwell and DM9025 Touch
Sensors. DM9025 Touch Sensors will be installed
throughout the sales floor. The devices will
monitor and report activity with various products
throughout the store. Multi-purpose mounting
hardware is included with each sensor.
Instructions are included on the initial set-up and
installation, removal if needed, and how to
reprogram to another location.
installation, removal if needed, and how to
reprogram to another location.
Hardware
SPEAKER
DM9025
LED
Included in the accessory kit
Adhesive mounting pads
Alcohol wipe
Alcohol wipe
Tie cables
Christmas Tree fasteners
Christmas Tree fasteners
Not included
Cutters – if needed during removal
Flathead screwdriver – if needed during removal
Wi-Fi Laptop or Smartphone
Wi-Fi Laptop or Smartphone
Replacement mounting kits are available for one or ten Touch
Sensors. Please call Indyme Solutions to order.
Please refer to page XXX for proper mounting of the device