GIGA-BYTE TECHNOLOGY CO. LTD. GN-WIKG Manuel D’Utilisation

33 

 

 

This troubleshooting guide lists questions and possible solutions to some common 
problems which you may encounter while installing or using GIGABYTE Wireless Mini-PCI 
Adapter. 

 

 Cannot Enable 802.1x, WPA or WPA-PSK 

 

Windows XP / 2000: 

1. Run the AegisI5.exe file found on the GN-WIKG installation CD. 
2. Click “Install”. 
 

 

Windows 98SE / ME: 

1. Run AegisI2.exe file found on the GN-WIKG installation CD. 
2. Click “Install”. 

 
 

 Cannot Establish Connection to a Wireless Network 

 

Make sure the SSID for the Wireless Mini-PCI Adapter is the same as the 
wireless access point or wireless router. 

 

Make sure the security settings are the same as that of wireless access point / 
router. If WEP or WPA encryption is enabled, check if the WEP or WPA keys for 
the GN-WIKG match.   

 

Check that the MAC address of the Wireless Mini-PC Adapter is included in the 
access point/router’s Authorization Table.   

 

 

 Can Connect to an Access Point, but Cannot Access the Internet 

 

Make sure the security settings are the same as that of wireless access point / 
router. If WEP or WPA encryption is enabled, check if the WEP or WPA keys for 
the GN-WIKG match.   

 

Verify the network settings (IP address, subnet mask, gateway, and DNS) of your 
computer. 

 

Check that the proxy server of the WEB browser is correctly set. 

 Poor Link Quality and Weak Signal Strength 

 

Keep the Wireless Mini-PCI Adapter away from microwave ovens and large metal 
objects to avoid radio interference. 

 

Locate the Wireless Mini-PC Adapter as near to the access point as possible.