Mascot Electric Co. Ltd. UF-18 Manuel D’Utilisation

 

 

WIRELESS 

                                                                                                    WIRELESS NOTE 

 

1 

This device complies with part 15 of the FCC rules.    Operations is subject to the following two 
conditions: (1)This device may not cause harmful interference and (2) This device must accept 
any interference received, including interference that may cause undesired operation 

Notice : The changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. 

IMPORTANT  NOTE:  To  comply  with  the  FCC  RF  exposure  compliance  requirements,  no 
change  to  the  antenna  or the  device  is  permitted.  Any  change  to the  antenna  or the  device 
could result in the device exceeding the RF exposure requirements and void user’s authority 
to operate the device. 
 

Thank you for purchasing our product.    This wireless microphone system operates in UHF 
band frequency with synthesizer controlled.    The system with 16 or 64 selectable frequencies 
via Phase Locked Loop (PLL) circuitry makes it easy to choose non-interfered channels.   
Please read this instruction manual carefully before operating the system.    This manual 
covers the configuration and operation of the wireless microphone system. 

Ø

  Do not spill liquid on the appliance and do not drop it on a hard concrete floor. 

Ø

  Do not place the appliance near heat sources such as radiators, amplifier, or etc.    Do not 

expose it to direct sunlight, extremely dust, excessive moisture, or vibration. 

Ø

  Take out the battery from transmitter, if the appliance has been not used for a longer 

period.    This will avoid the damage resulting from a defective leaking battery   

Ø

  Do not throw used batteries into a fire or garbage bin with domestic rubbish.    Be sure to 

dispose of used batteries in accordance with local waste disposal rules. 

Ø

  When disposing the equipment, remove the batteries, separate the case, circuit boards, 

and cables, and dispose of all components in accordance with local waste disposal rules. 

 

Ø

  Before setting up, make sure that the transmitter and receiver are tuned to the same 

frequency. 

Ø

  Do not use two transmitters in the same frequency.     

Ø

  Use good quality batteries to avoid the damage resulting from a defective leaking battery. 

Ø

  To avoid interference, do not put the receiver too near metal object and avoid obstructions 

between transmitter and receiver.     

Ø

  Avoid the interference from TV, radio, other wireless appliances and etc. 

Wireless Microphone