SMC Networks D3GN4 Manuel D’Utilisation
6
SMCD3GNV4 and SMCD3GNV4E Wireless EMTA Gateway Administrator Manual
Resetting or Rebooting the Gateway
You can use the Reset button on the Gateway rear panel to power cycle the Gateway or reset the
Gateway to its original factory default settings.
Note: You can also reset or reboot the Gateway using the Restore/Reboot page (see page
100).
Rebooting the Gateway
To reboot the Gateway and keep any customized overrides you made to the default settings:
1. Leave power cord connected to the Gateway.
2. Press and hold the Reset button on the Gateway back panel for about 10 seconds, then release the
Reset button.
3. Wait for the Gateway to reboot.
Restoring Factory Defaults
To reset the Gateway to its original factory default settings:
1. Leave power plugged into the Gateway.
2. Press and hold the Reset button on the Gateway back panel for about 15 seconds, then release the
Reset button.
3. Wait for the Gateway to reboot with factory default settings.