SMC Networks D3GNV3 Manuel D’Utilisation

錯誤

使用

[

常用

]

索引標籤將

Heading 1

套用到您想要在此處顯示的文字

套用到您想要在此處顯示的文字。

。

SMCD3GNV Wireless Cable Modem Gateway User Manual

Using the Reset Button

Using the reset button on the rear panel (see Figure 2 on page 15), you can perform two
types of reset operations with the Gateway:

Software reset – this reset operation power-cycles the Gateway and retains its current
configuration settings.

Factory default reset – this operation remove all overrides made to the Gateway’s factory
default configuration and returns the Gateway to its original factory default settings.

The number of seconds you press the reset button determines which reset operation is
performed. To protect against accidental resets, the reset button is recessed on the
Gateway rear panel.

Note: You can also reset the Gateway and retain its current configuration settings using the
RESET method described under “Restoring or Rebooting the Gateway” on page 98.

To use the reset button to perform a software or factory default reset:

1. Leave power plugged into the Gateway.

2. Find the reset button at the top of the back panel, then use a thin object to press and hold

the reset button as follows:

– To perform a software reset, press the reset button for at least 10 seconds.

– To perform a factory default reset, press the reset button for at least 15 seconds.

3. Release the reset button.