HID Global Corporation X001800C Manuel D’Utilisation
©
2010
HID
Global
Corporation
All
rights
reserved
DTC4500 Card Printer/Encoder User Guide
114
Configuring Fluorescent Data (F-Panel for YMCFKO Ribbon) using the Workbench
Step Procedure
12
Set the Ribbon for YMCFKO in the Printing Preferences. (Note: The Detect
Supplies at Print Time button may also be used. The F-Panel Ribbon must be
installed for this process to work.)
Supplies at Print Time button may also be used. The F-Panel Ribbon must be
installed for this process to work.)
13 Check
Dual Pass if you would like to print the F-Panel on a separate panel of
HDP film from the YMC image.
You should use the default Dual Pass option:
If the fluorescent image is used in places where other dye is used.
OR
Any time the Invert F-Panel Image option is selected.
14 Check
Invert F-Panel Image to create a negative of the fluorescent image.
• This refers to the ability to cause light or white areas of the image to
fluoresce and dark colors to remain dark on the printed card when exposed
to a UV light.
to a UV light.
• This was requested because the fluorescent dye color is bright when black
light is applied to it.
• By default, the dark areas of the image will fluoresce on the card and the
lighter or white areas will have no dye applied. (Note: This may improve
the look of the person’s image if used for the Logo.)
the look of the person’s image if used for the Logo.)