Trimble Inc. 6248192-B1 Manuel D’Utilisation

6     Configuring the Receiver Settings

58     SPSx80 Smart GPS Antenna User Guide

1.

Connect the data/power cable (part number 32345) to the receiver and the 
computer.

2.

Connect the O-shell Lemo connector to the receiver port.

3.

Connect the female DB9 connector to the computer.

4.

Connect the power leads of the data/power cable to the power supply.

5.

To open the application file you require, select File / Open.

6.

With the file open and the Configuration File dialog open, select 
Communications / Transmit File.

A message appears when the application file is successfully transmitted. If an error 
occurs, select Communications / Transmit File again. This overrides any incompatibility 
in baud rates and enables successful communication.

To check the successful transmission, close the Configuration File dialog and then 
select Communications / Get File. A list of all application files in the receiver appears. 

If you clicked 

 in the application file, the new file will be the 

current file.

To change files, select the required file from the list and then select 
Communications / Activate File.