Benq Corporation MP780ST Manuel D’Utilisation
Operation
51
Infrastructure mode connection, you need to select the projector’s SSID which
you want to connect. See
you want to connect. See
"Displaying image through Q Presenter" on page 60
for
details.
4.
Use your computer’s wireless connection utility to connect the network.
If WEP Key is set in the projector, the user must enter the password of WEP Key to connect the
network.
Controlling the projector remotely through a web
browser
Once you have configured the LAN settings, you can find the IP address for the projector
in the bottom of the network screen. You can use any computer that is on the same local
area network to control the projector.
1.
Enter the address of the projector in the address bar of your browser and press
Enter. For example: http://10.60.7.31
Enter. For example: http://10.60.7.31
2.
The BenQ remote network operation page opens.
•
The web page control supports IE version 7.0 or higher.