Teledesign Systems Inc TS4000GL Manuel D’Utilisation
TS4000 Radio Modem User’s Manual
Serial Port
14
The serial port provides a number of configuration options that allows it to be
connected to virtually any asynchronous host equipment. These configuration
options are set using the Serial Port tab of the Modem Configuration.
The baud rate list provides selection of the serial port asynchronous baud rate.
The available selections are 300, 1200, 2400, 4800, 9600, 19200 and 38400
baud.
These options set the number of data bits in each asynchronous character.
These options set the parity of the asynchronous characters.
Selection Description
Hardware Handshake
In this mode the RTS handshake line is used to
frame transmit data into bursts. The TS4000 burst
begins when RTS is activated and at least one
character (non-control string) is received.
Transmission ends when RTS goes inactive and
the burst has been completely transmitted.
frame transmit data into bursts. The TS4000 burst
begins when RTS is activated and at least one
character (non-control string) is received.
Transmission ends when RTS goes inactive and
the burst has been completely transmitted.
Data Activation
This mode uses a character timer to frame the
transmit data into bursts. The TS4000 burst begins
when one character (non-control string) is received.
The transmit burst is completed when the transmit
data line is idle (no data) for the number of
character periods defined by the data activation
timeout control.
transmit data into bursts. The TS4000 burst begins
when one character (non-control string) is received.
The transmit burst is completed when the transmit
data line is idle (no data) for the number of
character periods defined by the data activation
timeout control.
Configuration
Options – Serial
Port 1
Options – Serial
Port 1
Baud Rate List
Data Bits
Parity
Transmit Data Protocol