Teledesign Systems Inc TS4000GL Manuel D’Utilisation

 
Compatibility mode allows the TS4000 to be setup to be compatible with our 
previous generation TSI9600 radio modem. 
 

 

 
Selection Description 
Trimble 
Compatible 
Mode 

This mode allows the TS4000 to communicate with Trimble 
TrimMark and TrimTalk GPS data links. 

TSI9600 
Compatibility 
Mode 

This mode allows the TS4000 to communicate with 
Teledesign TSI9600s. 

3295 
Compatibility 

This configures the TSI9600 compatibility mode to be suitable 
for operation with JDT-3295 modems.   

The JDT-3295 is a TSI9600 with slightly different firmware.  
Typically the 3295 consisted of an enclosed TSI9600 modem 
and interface board connected with a cable to a separately 
enclosed radio transceiver. 

 
Selection Description 
Data Scrambling 

This control is equivalent to the data scrambling DIP switch 
on the TSI9600 modem board.  On the TSI9600 this switch is 
marked “H-F”. 

Transmit 
Deviation 

This sets the amount of transmit deviation.  This should be 
set to match the level of the TSI9600.   

Normally this should not be changed from the default value.