Dialogue Technology Corporation V51BBB Manuel D’Utilisation
21
2. Connect the display to an electrical outlet and then turn on the display.
3. Press
3. Press
Fn
+ ~ to switch to the external display.
Caution:
You can permanently damage a display if it does not
support the resolution that your computer is set to. Match
the resolution of the V5 to the external display before you
attach it to the computer.
support the resolution that your computer is set to. Match
the resolution of the V5 to the external display before you
attach it to the computer.
Connecting to a TV
You can connect a TV to FlyBook V5 to use as an external monitor.
1. Plug the 3.5 mm TV cable adapter into the TV cable jack at the rear of
FlyBook V5.
2. Connect the other end of the TV cable jack to a composite video RCA cable
(yellow connector).
3. Press Fn + ~ to change the V5 output to the television.
Note:
Before outputting the display to a video device, check the
device’s input signal type and change your computer’s output
signal type to meet it. The V5 outputs NTSC or PAL video
signals. Select the type in BIOS Setup Utility. The default
setting is Auto
device’s input signal type and change your computer’s output
signal type to meet it. The V5 outputs NTSC or PAL video
signals. Select the type in BIOS Setup Utility. The default
setting is Auto
Using an ExpressCard
You can use 34 mm-wide and 54 mm-wide ExpressCards with your FlyBook V5.