Fargo Electronics Inc OMNI5121P Manuel D’Utilisation
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5)
1
Printer Overview
HDP5000 Process Flow (in table format)
Reviewing the HDP5000 Boot-up Sequence
Step Process
1
The Card feed stepper turns ON (to check for a card in the card path).
2
The Lam Headlift turns until the head up position is returned from the Headlift
Sensor).
Sensor).
3
The Film transfer take-up Motor turns ON to take up any slack in the film.
4
The Print Headlift turns until head up position is returned from Headlift
Sensor.
Sensor.
5
The Print Ribbon moves forward until it finds the yellow panel, pauses,
advances to magenta, then backs up to yellow (the Ribbon Sensor detects
the color of the ribbon).
advances to magenta, then backs up to yellow (the Ribbon Sensor detects
the color of the ribbon).
6
The Transfer Film advances forward two panels from supply (advances until
the Print Film Sensor senses 2 marks on the Film).
the Print Film Sensor senses 2 marks on the Film).
7
The Transfer Film advances forward one panel from supply (advances until
the Print Film Sensor senses 1 mark on the Film).
the Print Film Sensor senses 1 mark on the Film).
8
The Transfer Film reverses for one panel onto supply (reverses until the Print
Film Sensor senses 1 mark on the Film).
Film Sensor senses 1 mark on the Film).
9
The Transfer Film reverses for one panel onto supply (reverses until the Print
Film Sensor senses 1 mark on the Film).
Film Sensor senses 1 mark on the Film).
Formatted: Bullets and Numbering