Hughes Network Systems HNS9101 Manuel D’Utilisation
This window gives you a summary of current Satellite IP Modem system configuration
and performance. When the Status Window is open, its information is updated every
minute. If you are running on battery power this will reduce the available operating
minute. If you are running on battery power this will reduce the available operating
time.
Network Status: Available or Unavailable. If the status is Available then the Satellite
IP Modem is ready to send and receive your data over the network. If the status is
Network Status: Available or Unavailable. If the status is Available then the Satellite
IP Modem is ready to send and receive your data over the network. If the status is
Unavailable then see the Fault Status for an indication as to why a network
connection is not available.
Connection Type: USB, Ethernet, or Bluetooth.
Battery Status: Battery, charging on AC Mains, or charged on AC Mains.
Signal Quality: This bar graph provides an indication of satellite signal quality.
connection is not available.
Connection Type: USB, Ethernet, or Bluetooth.
Battery Status: Battery, charging on AC Mains, or charged on AC Mains.
Signal Quality: This bar graph provides an indication of satellite signal quality.
;
Note
The Signal Quality status is a different measure of the received
satellite signal than the Signal Strength status shown on the pointing
satellite signal than the Signal Strength status shown on the pointing
screen. Seeing differences between these two levels is normal and
not an indication of a problem with your Satellite IP Modem.
not an indication of a problem with your Satellite IP Modem.
Battery Level: This bar graph provides an indication of remaining battery capacity.
Green: normal indication of battery level
Red: almost fully discharged
Amber: charging under external power
GPS Antenna: Internal or External.
F
AULT
S
TATUS
:
A
NY CURRENT SYSTEM FAULTS OR ERRORS
.
N
ETWORK
S
ETTINGS
After executing the necessary QuickStart Wizard steps to set up and configure the
Satellite IP Modem, you must select the Network Settings screen to complete your
network configuration. On this screen, you enter the appropriate Domain Name
Satellite IP Modem, you must select the Network Settings screen to complete your
network configuration. On this screen, you enter the appropriate Domain Name
Service (DNS) and the Access Point Name (APN) information given to you by your
Service Provider.
Service Provider.
;
Notes
Your Service Provider may have already performed this configuration
step for you.
Your Service Provider must give you all the information necessary to
complete these fields accurately. Do not attempt to input any of
these settings without Service Provider information.
these settings without Service Provider information.
Whenever you modify the DNS addresses on the Network Settings
screen, you must exit the Control Pad, exit the Launch Pad, reboot
your computer, and power the Satellite IP Modem off and then back
on so that the new settings can take effect.
on so that the new settings can take effect.
Regional BGAN Satellite IP Modem User Manual
23