Hughes Network Systems HNS9202 Manuel D’Utilisation
Using the Hughes 9
Revision 0.2
27
This change does not take effect until the UT is reset. When set
to Automatic, the UT will select the satellite based on the unit‘s
GPS position. When set to a specific satellite, it will attempt to
use that satellite only. Be careful to select the correct satellite for
your position.
to Automatic, the UT will select the satellite based on the unit‘s
GPS position. When set to a specific satellite, it will attempt to
use that satellite only. Be careful to select the correct satellite for
your position.
Streaming – By enabling this parameter, the user can turn on a
timer for inactivity for a streaming QoS that has been set up.
The timer is in either seconds or minutes and will tear down a
streaming context after X seconds or minutes of inactivity.
timer for inactivity for a streaming QoS that has been set up.
The timer is in either seconds or minutes and will tear down a
streaming context after X seconds or minutes of inactivity.
Emergency Call Numbers: Allows the user to add the
emergency call number that is applicable in the part of the world
where the terminal is being used, if it is not already defined.
emergency call number that is applicable in the part of the world
where the terminal is being used, if it is not already defined.
Apply Changes Button: This button is self-explanatory.