Titan Electronics Inc NETCOM423 Manuel D’Utilisation
Webbrowser, it will attempt to immediately save the key to a file on
your disc. Since the Internet Explorer also shows this behaviour, the
Firmware suggests a file extension of “.cfg” instead of “.key”.
Windows may react crazy on “key”-files. Please also note, this fresh
new key is only displayed/saved. The configuration of the NetCom has
not changed.
To use this new key on the NetCom, you must “Load” it to the NetCom.
This is the way to “Upload” any key to the NetCom, regardless of the
source. Instead of loading a new key to the NetCom, it is possible to
“Show” the key currently used. Again some browsers including Internet
Explorer directly attempt to save the key.
If “Logging” is enabled, NetCom sends the messages of OpenVPN™ to
the standard debug log output.
your disc. Since the Internet Explorer also shows this behaviour, the
Firmware suggests a file extension of “.cfg” instead of “.key”.
Windows may react crazy on “key”-files. Please also note, this fresh
new key is only displayed/saved. The configuration of the NetCom has
not changed.
To use this new key on the NetCom, you must “Load” it to the NetCom.
This is the way to “Upload” any key to the NetCom, regardless of the
source. Instead of loading a new key to the NetCom, it is possible to
“Show” the key currently used. Again some browsers including Internet
Explorer directly attempt to save the key.
If “Logging” is enabled, NetCom sends the messages of OpenVPN™ to
the standard debug log output.
5.1.1.5. Authentification
”Authentification” sets a password to
restrict access to the configuration of
NetCom. To protect against accidental
mistyping, you must type the Password
twice.
restrict access to the configuration of
NetCom. To protect against accidental
mistyping, you must type the Password
twice.
Image 24: Web Panel Authentification
5.1.1.6.
Date & Time
It may be helpful to have a correct
time setting in the NetCom. You
may manually enter the time here.
Please note, there is no real time
clock with a battery backup in the
NetCom. When the NetCom is
restarted, the time is lost.
But since Firmware version 1.6 it is
possible to configure NetCom for
automatic time retrieval via SNTP.
Define “State” for retrieval method
of “Interval” or “Startup”, or “Off”
of course. Parameter “Mode” is
used to find the Time Server. It
time setting in the NetCom. You
may manually enter the time here.
Please note, there is no real time
clock with a battery backup in the
NetCom. When the NetCom is
restarted, the time is lost.
But since Firmware version 1.6 it is
possible to configure NetCom for
automatic time retrieval via SNTP.
Define “State” for retrieval method
of “Interval” or “Startup”, or “Off”
of course. Parameter “Mode” is
used to find the Time Server. It
may be defined direct, or by DHCP. The “Interval” in seconds instructs
the NetCom to regularly check for an update of the internal time
settings. The Time Server may be given by IP-Address, or by name. A
the NetCom to regularly check for an update of the internal time
settings. The Time Server may be given by IP-Address, or by name. A
Image 25: Web Panel Date & Time
Page
31
NetCom 123 WLAN, 423 WLAN,