Titan Electronics Inc NETCOM423 Manuel D’Utilisation
5.3.2. S
ERVER
C
ONFIGURATION
M
ENU
5.3.2.1. Parameter
Selecting “Parameter” brings up all Network
configuration items, listed below.
configuration items, listed below.
Use the cursors to select the parameter you want to change. Hit <Enter>
to go in edit mode. Type the new value.
to go in edit mode. Type the new value.
ServerConfig
+--------------------+
|
|
Parameter
|
| Wireless |
| OpenVPN |
| Authentification |
| Date & Time |
| Info |
+--------------------+
Image 61: Telnet Server
| OpenVPN |
| Authentification |
| Date & Time |
| Info |
+--------------------+
Image 61: Telnet Server
Configuration
Server Parameter
Server Name
[NetCom_0051100021 ]
MAC Address 00:04:D9:80:00:14
Interface Priority Cable, Wireless
DHCP Enabled
IP Address 192.168.1.81
Netmask 255.255.255.0
Broadcast 192.168.1.255
Gateway 192.168.1.1
DNS 192.168.1.3
Domain netcom.vscom.com.tw
ConfigPort [23 ]
PrintServerPort [515 ]
KeepAlive Off
KeepAliveInterval [0 ]
Image 62: Telnet IP-Configuration Parameters
Interface Priority Cable, Wireless
DHCP Enabled
IP Address 192.168.1.81
Netmask 255.255.255.0
Broadcast 192.168.1.255
Gateway 192.168.1.1
DNS 192.168.1.3
Domain netcom.vscom.com.tw
ConfigPort [23 ]
PrintServerPort [515 ]
KeepAlive Off
KeepAliveInterval [0 ]
Image 62: Telnet IP-Configuration Parameters
“Server Name” identifies the device when the driver software searches
for devices; this will help you find the correct NetCom server.
for devices; this will help you find the correct NetCom server.
”Interface Priority” selects the network interface as
Cable,
Wireless
or both.
DHCP is for automatic IP configuration. “IP Address”, “Netmask” and
“Broadcast” are parameters you get from your network administrator.
Same applies to “Gateway”, “DNS” and “Domain”. The “ConfigPort”
is 23 by default, which is standard for Telnet. You should only change
it if you have strong reasons.
”PrintServerPort” is related to the new protocol of RFC1197, mostly
referred to as »Line Printer Daemon«.
“Broadcast” are parameters you get from your network administrator.
Same applies to “Gateway”, “DNS” and “Domain”. The “ConfigPort”
is 23 by default, which is standard for Telnet. You should only change
it if you have strong reasons.
”PrintServerPort” is related to the new protocol of RFC1197, mostly
referred to as »Line Printer Daemon«.
”KeepAlive” is the TCP-intrinsic function of connection checking. The
related interval is defined in seconds.
related interval is defined in seconds.
823RM WLAN, 1623RM WLAN
Page
56