Titan Electronics Inc NETCOM423 Manuel D’Utilisation
If inactive, the driver software retrieves the Modem status from
the NetCom serial port each time the application requests it. With
a maximum frequency of 10 per second. If the latest retrieved
information is not older than 100 milliseconds, this value is
returned.
the NetCom serial port each time the application requests it. With
a maximum frequency of 10 per second. If the latest retrieved
information is not older than 100 milliseconds, this value is
returned.
“Simulate Device Off on Connection Loss”: When this option is
enabled, the NetCom driver does not attempt to preserve
transmitted data. If on a normal serial port the connected device is
switched off, all data sent to this device gets lost. NetCom
simulates this behaviour. All data sent from the application to the
driver is discarded, when the TCP connection to the NetCom is
lost. The NetCom attempts to re-establish the connection in
regular intervals. When it is available again, data may be
transferred from then on.
transmitted data. If on a normal serial port the connected device is
switched off, all data sent to this device gets lost. NetCom
simulates this behaviour. All data sent from the application to the
driver is discarded, when the TCP connection to the NetCom is
lost. The NetCom attempts to re-establish the connection in
regular intervals. When it is available again, data may be
transferred from then on.
6.5. R
EMOTE
S
ETTINGS
P
ROPERTIES
The other panel created by activating the “Advanced” checkbox on the
“Performance” tab, is the “Remote Settings” tab.
“Performance” tab, is the “Remote Settings” tab.
Image 116: NetCom COM Port Remote Settings Properties
Page
83
NetCom 123 WLAN, 423 WLAN,