Yaesu Musen Co. Ltd. 30453X20 Manuel D’Utilisation

Page 18

The FCC prohibits the following communications:



False distress or emergency messages:



Messages to “any boat” except in emergencies and radio tests;



Messages to or from a vessel on land;



Transmission while on land;



Obscene, indecent, or profane language (potential fine of $10,000).

1. Install the battery pack on the transceiver (see section “4.3.2 BATTERY

”).

2. Install the antenna onto the transceiver; hold the bottom end of the an-

tenna, then screw it onto the mating connector on the transceiver until it is
snug. Do not over-tighten.

1. Turn the VOL knob clockwise to turn the transceiver on.
2. Press the 

 key to activate the squelch adjusting mode

(The “SQL” indicator will blink). Press the 

 key until

the “

” indicator will appear on the display, then

press the 

 key again.

3. Turn up the VOL knob until the noise or audio from the speaker is at a

comfortable level.

4. Press the 

 key, then press the 

 key until the ran-

dom noise disappears. This state is known as the
“Squelch Threshold”.

5. Press the 

 or 

 key to select the desired channel.

Refer to the channel chart on page 33 for available chan-
nels.

6. When a signal is received, adjust the VOL knob to the

desired listening level. The “

” indicator in the LCD

is displayed indicating that the channel is being used.

FCC ID:K6630453X20 / IC: 511B-30453X20

Vertex Standard Co., Ltd.