Yaesu Musen Co. Ltd. 50023X20 Manuel D’Utilisation
FTA-250L O
perATing
M
AnuAL
28
28
a
dvanCed
o
peratIon
Function Modes
The [
FUNC] key provides up to 6 quick access func-
tion assignments.
1. Press the [
1. Press the [
FUNC] key.
2. Select the desired function
by pressing the [◄] or [
►]
key, and then press the
[ENT] key.
DUAL WATCH
Activates the dual watch function (see page
21).RX NOISE
Setting the level of RX noise canceling (see
page 22).
DIM/DISP
Enable/Disable the display lamp il-
lumination.
SCAN MEM
The current channel is marked to be
scanned (see page 33).
SCAN
Activates the scan function (see
page 32).
KEY BEEP
Setting the loudness of key beeps (see
page 37).MEMO
Enters Memory writing mode (see page
30).LIGHT
The white LED may be used as a flashlight.
To program the function assigned to the function key:
1. [
MENU] à “SETUP” à “CONFIG” à “KEY AS-
SIGNMENT”.
2. Select the assign number (“1” to “6”) to which you
want to assign a function by pressing the [▲] or [
▼]
key, and then press the [
ENT] key.
3. Select the function you want to assign to the Func-
tion Screen by pressing the [◄] or [
►] key, and
then press the [
ENT] key.
Tip: The default setting:
1: DUAL WATCH
4: RX NOISE
2: SCAN
5: DIM/DISP
3: SCAN MEM
6: LIGHT
4. Press the
PTT switch to return to normal opera-
tion.