RELM WIRELESS CORP. - BK RADIO APV5 Manuel D’Utilisation
14
BK Radio
Figure 2. Installing and removing the antenna
Antenna Installation and Removal
Before using your Aurora
radio, you need to install the
radio, you need to install the
antenna.
• To install the antenna,
carefully place it on the
TNC-type antenna
connector located on the
right side of the radio.
Turn the antenna
clockwise until it is firmly
attached.
TNC-type antenna
connector located on the
right side of the radio.
Turn the antenna
clockwise until it is firmly
attached.
• To remove the antenna,
turn the antenna
counterclockwise until
you can lift the antenna
away from the radio.
counterclockwise until
you can lift the antenna
away from the radio.
Removing the Battery
WARNING:
Explosion Hazard
Do not dispose a battery pack into a fire.
To avoid explosion, intrinsically safe radios designed
for use in hazardous environments MUST use
replacement batteries approved by Factory Mutual.
for use in hazardous environments MUST use
replacement batteries approved by Factory Mutual.
To remove the battery, press down on the locking tabs and
reverse the order for installing the battery.
reverse the order for installing the battery.