Starkey Laboratories Inc WW Manuel D’Utilisation
2
3
4
5
6
7
8
9
1) Special Feature
2) Memory/Program
Operations Manual
WATCH
Table of Contents
Overview
SurfLink Watch Overview
4
Operation
Modifying Date and Time 6
Toggle Between Seconds View and Date View 6
Illuminate Display 7
Generate Unique Address Code
for Pairing with Hearing Devices 7
Battery Replacement
10
Watch Care
13
FCC Information
14
Overview
The SurfLink Watch features:
• Remote control
• A watch
• 12/24-hour time formats
• American/International date formats
Overview
3) Volume Increase
4) Home/Reset
5) Volume Decrease
Overview
1) Special Feature
Functionality
Press STAR ( ). This button may have
different functionality depending on the
hearing device setup performed by your
hearing professional.
different functionality depending on the
hearing device setup performed by your
hearing professional.
2) Memory or Program
Change
Press PROGRAM ( ). Repeat as needed.
3) Volume Increase
Press VOLUME UP ( ).
Repeat as needed.
Repeat as needed.
4) Home or Hearing
Device Reset
Press RESET ( ). Hearing devices will
return to their power-up settings.
return to their power-up settings.
5) Volume Decrease
Press VOLUME DOWN ( ).
Repeat as needed.
Repeat as needed.
Operation
Modifying Time and Date
A. Press and hold SET ( ) for 3 seconds. HOURS digits will fl ash.
B. Press UP ( ) to advance. Go through 12 hours for AM or PM.
C. Press MODE ( ) to select MINUTES, then UP ( ) to advance.
D. Repeat to set SECONDS, YEAR, MONTH, DAY, 12/24-hour TIME
display, and Month-Day/Day-Month DATE display.
E. Press SET ( ) when done.
Toggle Between Seconds View And Date View
A. Press and hold MODE ( ) until display changes (about 3 seconds).
Operation
Illuminate Display
Display illumination becomes visible in low light situations.
A. Press and hold LIGHT ( ) for at least 1 second to illuminate
watch face.
B. Note: Pressing LIGHT ( ) for less than 1 second may cause hearing
devices to return to their power-up settings.
Generate Unique Address Code for Pairing with
Hearing Devices
Hearing Devices
Watch Only: This allows a hearing professional to generate a unique
address code, which is used during a programming session, to pair the
SurfLink Watch with your individual hearing devices.
address code, which is used during a programming session, to pair the
SurfLink Watch with your individual hearing devices.
Operation
A. Press and hold MODE ( ) until 6-digit address appears
(about 10 seconds).
B. Write down 6-digit address displayed on your watch and give to
your hearing professional.
C. Press SET ( ) when done.
Watch Plus Another Watch Control: If you already use another Watch
control, such as a SurfLink Watch with your wireless hearing devices, a
hearing professional can adjust the watch’s address code to match your
existing Watch control. Both Watch controls can then make hearing
device adjustments.
control, such as a SurfLink Watch with your wireless hearing devices, a
hearing professional can adjust the watch’s address code to match your
existing Watch control. Both Watch controls can then make hearing
device adjustments.
A. Press and hold MODE ( ) until 6-digit address appears
(about 10 seconds).
Operation
B. To match another Watch control pairing address,
press UP ( ) to advance.
C. Press MODE ( ) to advance to next address fi eld,
then UP ( ) to advance.
D. Repeat until 6-digit address matches the other Watch control.
E. Press SET ( ) when done.