Timex Group USA Inc. TMXM010 Manuel D’Utilisation

v

  Your 100 Meter Water Resistant watch withstands water pressure to 

200 p.s.i. (equals immersion to 328 feet or 100 meters below sea 

level).

v

  The watch is only water-resistant as long as the lens, pushbuttons, 

and case remain intact.

v

  Timex recommends rinsing your watch with fresh water after exposure 

to salt water.

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY 

BUTTONS UNDER WATER.

v

  Your 30 Meter Water Resistant heart rate sensor can withstand water 

pressure to 60 p.s.i. (equals immersion to 98 feet or 30 meters below 

sea level).

WARNING: THIS UNIT WILL NOT TRANSMIT YOUR HEART RATE WHEN 

OPERATED IN OR UNDER WATER.

To test the new battery after you have inserted it: 
1.  Move away from any possible sources of electrical or radio 

interference.

2.  Wet the heart rate sensor pads and securely fasten the chest strap 

below your sternum. 

3.  While wearing the watch, press the HEART RATE button. A hollow heart 

rate icon will appear on the display.

4.  If you do not see a flashing heart icon on your watch, reinstall the 

sensor battery.

NOTE: It is not necessary for a heart rate value to appear on the display 

during this test.

When the battery of the watch is running low, the display or INDIGLO

®

 

night-light will dim. This watch uses a CR2025 lithium battery. 
To avoid the possibility of permanently damaging the watch, TIMEX 

STRONGLY RECOMMENDS TAKING YOUR HEART RATE MONITOR WATCH 

TO A LOCAL RETAILER OR JEWELER TO HAVE THE BATTERY REPLACED.

®

Press the INDIGLO

®

 button to activate the night light. Electroluminescent 

technology illuminates the watch display at night and in low light conditions.