Boston Scientific Corporation CRM293604 Manuel D’Utilisation

Pairing the HF PARTNER Device with a Compatible Printer

19

5.

Insert the new batteries.

6.

Replace the rubber case bottom on the HF PARTNER device.

7.

Properly dispose of the old batteries.

8.

Press the green INTERROGATE button 

 to ensure that the HF PARTNER 

device is functioning properly. 

A printer must be paired to the HF PARTNER device to transmit a diagnostic report 
securely. Reports can only be printed to a paired printer. The HF PARTNER system is 
paired before it is shipped; however, follow these steps to set up the printer should 
you get a new system component:
1.

Go into the configuration mode by pressing the green INTERROGATE button 

 twice and the blue PRINT button 

 once within three seconds.