Guangzhou Panyu Juda Car Audio Equipment Co. Ltd. BL5601 Manuel D’Utilisation

When the speaker is in bluetooth connection 
working mode.

Use the bluetooth speaker answer the 

phone call in hands free when there is a 
phone call in.

Hold down this button for 3 seconds to 

disconnected the bluetooth connections, the 
speaker will turn to pairing other matching 
bluetooth device when you hear the voice 
prompt of Device  Disconnected ,Pairing 
Device. Press this button each time you will 
hear the voice prompt of Pairing Device 
when the speaker without bluetooth 
connection status.

-1-

-2-

-3-

-4-

-7-

-6-

-5-

1

2

3

1. STANDBY
2. VOLUME-
3. MICROPHONE

1. POWER ON/OFF
2. 
3. 

DC IN 5V

AUX INPUT(3.5MM)

4.USB CHARGING FOR EXTERNAL DEVICE

    Thanks for your purchase of our product. 
Please read through this manual before 
making connections and operating this 
product. Retain this manual for future 
reference.

Bluetooth playback
AUX input
Power supply: DC-5V

Note: 

Use DC adapter or USB terminal to 

charge battery no matter the speaker power 
on or off.

In low battery status, the bluetooth 

speaker will emit once Battery Low,Please 
Charging voice prompt per five minutes and 
it will switch off automatically if no charged in 
low battery status.

Power consumption:5W
Speaker max output: 2WX2

Note:The bluetooth speakr will turn to 
standby mode after 15 minutes in the 
absence of no source status,standby power 
is less than 0.5W.

When the speaker is in working mode, 

press to turn down the volume.

You will hear the beep sound when you 

turn down to the minimum volume.

When the speaker is in working mode, 

press to turn up the volume.

You will hear the beep sound when you 

turn up to the maximum volume.

Do not drop any objects into the unit through the 

openings. 

Do not spill or spray liquid of any kind on or in the 

unit. It may result in a fire or electric shock. 

Do not place anything heavy on the unit. 
To ensure proper ventilation and proper 

operation, never cover or block the slots and 
opening with a cloth or other materials. 

Keep the unit away from an open flame such as 

fire, candle, etc. 

Install the batteries correctly. 
Please dispose the batteries according to the 

local rule and law. 

The maximum working temperature is 35 

degrees Celsius.

Only use attachments/accessories specified by 

the manufacturer.

Where the Mains plug is used as the disconnect 

device, the disconnect device shall remain readily 
operable.

Rating label are on the bottom of the unit.

WARNING: The batteries shall not be exposed to 
excessive heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery is 
incorrectly replaced.Replace only with the same or 
equivalent type.

BLUETOOTH SPEAKER

Happy Plugs

4. VOLUME+
5. BLUETOOTH

2 3 4

1

1

1. BLUETOOTH INDICATOR
2. CHARGING-INDICATOR

Power on the speaker by sliding the 

ON/OFF switch to the ON position and press 
the standby button, the red and the blue 
indicator flashing alternately, you will hear 

User manual
USB cable

This speaker has an extra group of audio 

input terminals. You can input the analogue 
stereo audio signals from extra devices such 
as mobile phone, computer,MP3 player, etc.

Use the audio cable to connect the audio 

output terminals of mobile phone, computer, 
MP3 player to the audio input terminal (AUX 
IN) of this speaker. 

If BT is connected,plug in AUX in cable,you 

have to pause the music in the connected 
device to start play music through AUX in.

If BT is connected,plug in AUX in cable,you 

can disconnect the speaker to give priority to 
aux in,too.

 .

Use the USB cable to connect the USB slot 

of the player to other device input terminals 
to charge battery ,likes mobile phone, etc  
Please note the charge port could  charge 
battery no matter in standby status or power 
on status.

the voice prompt of Sound Piece Ready To 
Go,Pairing Device, the speaker is in 
searching bluetooth signal status.  

The blue indicator flashing once per  2 

seconds means bluetooth was connected, 
you will hear the voice prompt of  Device  
Connected, and the model of the speaker 
will shows on your device.

The bluetooth speaker will go into power 

off and it emit Sound Piece Going To Sleep 
voice prompt if hold down the standby button  
in power on status.

It is better to switch off the unit before 

charging. The charging-indicator changing 
from red to light off indicates that the battery 
has been fully charged.

5

4

2

Sound Piece mini