USA Alinco Branch DR-135T Manuel D’Utilisation
34
8. PACKET OPERATION
Packet Mode Setting
1.
Press FUNC key. While F icon is on, press SQL key. [
] appears on the LCD
display and the transceiver enters packet mode. Repeat the same sequence to exit
from packet mode.
from packet mode.
2.
Use the computer keyboard to send designated commands from your PC to enter to
the packet network and start operation. Refer to the chart for TNC commands. Use
the commands to select between 1200/9600 bps data speed.
the packet network and start operation. Refer to the chart for TNC commands. Use
the commands to select between 1200/9600 bps data speed.
Reference:
The configuration of EJ-41U is as follows. Please use PC commands to program.
• Data Speed (Transfer Rate)
9600bps
• Data Length
8 bit
• Parity Bit
none
• Stop bit
1 bit
• Flow Control
Xon/Xoff
Once the EJ-41U is programmed, the settings are stored in memory even if the unit
is removed from the transceiver. Some EJ-41U functions may be limited as com-
pared to those found in an external TNC.
is removed from the transceiver. Some EJ-41U functions may be limited as com-
pared to those found in an external TNC.
W2
VCO case
CN107
DSUB-9
Bottom side
W1
DATA
TX
3.
Place the cushion sticker on the VCO shield case (a metal housing on the circuit
board).
board).