VTech Telecommunications Ltd 80-6879-01 Manuel D’Utilisation

19

Bluetooth

Bluetooth setup

The telephone base displays Connect headset 
to base?. Press the YES softkey to confirm. The 

telephone base displays Headset setup completed. 
Device connected.. The corresponding status icon  

(  A or   B) displays when the headset is successfully 

connected. The corresponding light on the telephone 

base (DEVICE A or DEVICE B) turns on. 

When you already have two devices on the active 

devices list, the screen displays Max. connectable 
devices is two and you are prompted to replace an existing device 
on the active devices list (page 24).
When you already have one headset on the active devices list, the 
telephone base shows Only 1 headset can be connected. You are 

prompted to replace the headset on the active devices list. The 
screen displays Headset A will be replaced from Active list?. Press 

the YES softkey to replace the existing headset on the active  
devices list.

The pairing process may take up to one minute. If the pairing process fails, try again.
If your Bluetooth device fails to connect with the telephone base, the telephone 
base displays Connection failed and then Auto-connect function enabled. Press the 
SELECT softkey and the telephone base will then periodically attempt to connect with 
your Bluetooth device.

9.

•

•

•
•

Connect headset 

to base?

  YES       NO

Headset setup

completed.

Device

connected.