VTech Telecommunications Ltd 80-7296-00 Manuel D’Utilisation
52
Appendix
Expand your telephone system
The handsets provided with your telephone system are pre-registered. Each
handset is assigned a number that shows on the handset display. Additional
handsets registered to the telephone system are assigned in sequential
order. For instance, if the telephone system already has HANDSET 1 and
HANDSET 2, the new registered handset is assigned HANDSET 3. This
VGNGRJQPGU[UVGOCEEQOOQFCVGUWRVQſXGJCPFUGVU
handset is assigned a number that shows on the handset display. Additional
handsets registered to the telephone system are assigned in sequential
order. For instance, if the telephone system already has HANDSET 1 and
HANDSET 2, the new registered handset is assigned HANDSET 3. This
VGNGRJQPGU[UVGOCEEQOOQFCVGUWRVQſXGJCPFUGVU
Add and register a handset (optional)
You can add new handsets (LS6305, purchased separately) to your
telephone system, but each handset must be registered with the
VGNGRJQPGDCUGDGHQTGWUG9JGPſTUVRWTEJCUGFGCEJGZRCPUKQP
handset shows 1.Press FIND HS on base 4sec and 2.Then press # on
handset alternately. You may need to charge the handset before registering
to the telephone base. For more details on battery charging, see the table
on page 4.
To register a handset:
telephone system, but each handset must be registered with the
VGNGRJQPGDCUGDGHQTGWUG9JGPſTUVRWTEJCUGFGCEJGZRCPUKQP
handset shows 1.Press FIND HS on base 4sec and 2.Then press # on
handset alternately. You may need to charge the handset before registering
to the telephone base. For more details on battery charging, see the table
on page 4.
To register a handset:
Place the unregistered handset in the telephone base or charger. If
1.Press FIND HS on base 4sec and 2.Then press # on handset do not
appear alternately on the handset screen after a few seconds, remove the
handset and place it in the telephone base or charger again.
On the telephone base, press and hold /FIND HANDSET for about four
seconds (until the red IN USE light on the telephone base turns on) and
then release the button.
On the handset, press # and the handset shows Registering...Please
wait. It takes about 10 seconds to complete the registration. The
handset shows HANDSET X Registered and you hear a beep when the
registration completes.
1.Press FIND HS on base 4sec and 2.Then press # on handset do not
appear alternately on the handset screen after a few seconds, remove the
handset and place it in the telephone base or charger again.
On the telephone base, press and hold /FIND HANDSET for about four
seconds (until the red IN USE light on the telephone base turns on) and
then release the button.
On the handset, press # and the handset shows Registering...Please
wait. It takes about 10 seconds to complete the registration. The
handset shows HANDSET X Registered and you hear a beep when the
registration completes.
1.
2.
3.
If the registration fails, the handset shows 1.Press FIND HS on base 4 sec
and 2.Then press # on handset alternately. To reset the handset, remove
the handset from the telephone base and place it back in. Try the registration
process again.
and 2.Then press # on handset alternately. To reset the handset, remove
the handset from the telephone base and place it back in. Try the registration
process again.
You cannot register a handset if any other system handset is in use.
•
•