VTech Telecommunications Ltd 80-8052-00 Manuel D’Utilisation

Getting started

7

Wall mount installation

The telephone base comes ready for tabletop use. If you want to mount your 
telephone on a wall, use the provided wall mount bracket to connect with 
a standard dual-stud telephone wall mounting plate. If you do not have this 
mounting plate, you can purchase one from many hardware or customer 
electronics retailers. Professional assistance may be required to install the 
mounting plate.

To charge the telephone base from the tabletop installation to wall mount 
installation, make sure you first unplug the power adapter from the electrical 
outlet and unplug the telephone line cord from the telephone wall jack.

Plug one end of the telephone line cord into the TEL. LINE jack on the 
bottom of the telephone base. Plug the small end of the larger power 
adapter into the power jack on the bottom of the telephone wall jack.

Position the telephone base as shown below. Insert the extended tabs of 
the wall mount bracket into the slot on the back of the telephone base. 
Push the telephone base down until it clicks securely in place.

Route the telephone line cord through the wall mount bracket hole. Route 
the power cord out of the bottom of the telephone.

1.

2.

3.

Slots for wall mount 
bracket installation

DSL filter (not included) is 
required if you have DSL high-
speed Internet service.