VTech Telecommunications Ltd 80-9090-00 Manuel D’Utilisation
105
Answering system settings
Use the answering system menu of the telephone base to set up the
announcement message, turn the answering system or message alert tone on
or off, activate call screening, or change the number of rings, remote access
code or message recording time. If you turn off the answering system and you
change any setting in the answering system setup menu, the answering system
automatically turns on again.
announcement message, turn the answering system or message alert tone on
or off, activate call screening, or change the number of rings, remote access
code or message recording time. If you turn off the answering system and you
change any setting in the answering system setup menu, the answering system
automatically turns on again.
Announcement
Your outgoing announcement plays when calls are answered by the
answering system.
answering system.
The telephone has a default outgoing announcement, “Hello, please leave a
message after the tone.” You can use this default announcement, or record
your own.
message after the tone.” You can use this default announcement, or record
your own.
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than two seconds.
record any announcement shorter than two seconds.
To play a new outgoing announcement:
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU
to
enter the main menu.
2. P
ress
CID
, DIR,
/RECORD
or /DELETE
to highlight
Answering system, and then press
SELECT
.
.
3. P
ress
CID
, DIR,
/RECORD
or /DELETE to highlight
Mailbox 1 or Mailbox 2, and then press
SELECT
.
4. Press
SELECT
again to select Announcement.
5. Press
SELECT
to select Play annc, and then
press
SELECT
.
Answering system
ANSWERING SYSTEM
Announcement
Delete all old
Record memo
Record memo
SELECT
BACK
Playing
announcement
STOP
RECORD