VTech Telecommunications Ltd 80-9090-00 Manuel D’Utilisation
73
Multiple handset use
Intercom
Use the intercom feature for conversations between two devices, or a device
and the telephone base. You can buy additional expansion handsets (model
AT&T TL86003) for this telephone base to expand your telephone system (up
to 12 handsets).
and the telephone base. You can buy additional expansion handsets (model
AT&T TL86003) for this telephone base to expand your telephone system (up
to 12 handsets).
To initiate, answer, and end an intercom call:
Using a cordless handset:
1.
Press
MENU
in idle mode to enter the main menu. Press
CID or DIR to highlight Intercom, and then press
SELECT
.
If you have one handset, the handset shows Calling base.
If you have more than one handset, the handset shows
INTERCOM TO
:
Use the dialing keys to e
enter a specific
device number (0 for the telephone base, 1-9 for handsets
1-9,
1-9,
TONE followed by 0-2 for handsets 10-12, TONE
followed by # for all devices; # for a single DECT headset,
# followed by 1 or 2 for DECT headset/speaker 1 or DECT
headset/speaker 2 respectively),
# followed by 1 or 2 for DECT headset/speaker 1 or DECT
headset/speaker 2 respectively),
or press
CID or DIR
to highlight the desired device and press
SELECT
.
Your handset screen
shows Calling HANDSET X, Calling Base or Calling all.
The destination device(s) rings and shows HANDSET X is calling or
HANDSET X is calling all (
HANDSET X is calling all (
HANDSET represents the handset name,
X represents the handset number)
.
2.
To answer the intercom call, press
LINE 1/
FLASH
,
LINE 2/
FLASH
,
/SPEAKER
SPEAKER,
A CELL,
B CELL
, any dialing key (0-9, TONE ), or press
ANSWER
on the destination handset. Both devices now show Intercom.
3. To end the intercom call, press
END
,
OFF/
CANCEL
, or put the cordless handset
into the charger
; or p
press
END
on the telephone base. Both devices display
Intercom ended.
•
•
Play messages
Directory
Caller ID log
Intercom
BACK SELECT
INTERCOM TO:
BASE 0
HANDSET 2
BACK SELECT