VTech Telecommunications Ltd 80-9090-00 Manuel D’Utilisation

79

Multiple handset use

Push-to-talk (PTT)

1. There are a few ways to begin a PTT call to a single device. When the hand-

set is not in use:

If you have one handset, press and hold PUSH TO TALK.

If you have more than one handset:

 Press PUSH TO TALK on the handset, and then use the dialing keys to 

enter the destination device number.

 Press PUSH TO TALK on the handset. Press  CID

 

or

  DIR

 to highlight 

the destination device number, and then press 

 or PUSH TO 

TALK.

The handset shows Connecting to HANDSET X... (HANDSET represents the 
handset name, X represents the destination handset number) or Connecting 
to BASE 0... (

BASE 0 represents the base name)

 for a few seconds. When the 

connection is made, both your and the destination device screens display 
Press and hold [PTT] to talk. 

2. Press and hold PUSH TO TALK. A chirp indicates your microphone is on. 

Speak towards the device. Your voice is broadcast to the destination device.
While you are speaking, your handset shows PTT To HANDSET X or  
PTT To BASE 0.

3. Release PUSH TO TALK after speaking. Both devices beep once again and 

the screens show Press and hold [PTT] to talk, and then you can  
press and hold PUSH TO TALK to continue speaking or the destination 
device can respond (see Answer a PTT call on page 82).

4. To end the PTT call, press OFF/

 or 

, or place the handset in the 

charger. The handset shows Push to talk ended.

NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one 

presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.

•

•